4s Diesel Engine ECD

4s Diesel Engine ECD(RIG With Eddy Current Dynamometer )

Product Code:123D

*An ENGLISH instruction manual with elaborate experimental procedures and block diagram etc. shall be provided with the training system set-up.

Description:

IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine. It consists of an IC Engine, dynamometer, fuel measuring, air intake measuring and various other arrangements.

Experimentation:

To determine specific fuel consumption.
To determine Brake Power.
To determine Brake Thermal Efficiency.
To determine volumetric efficiency.

Utilites Required:

Electricity Supply: Single Phase, 220V AC, 50 Hz, 5-15 amp. Combined socket with earth connection.
Water Supply: Continuous @10LPM at 1 Bar Pressure for Engine & exhaust gas calorimeter cooling.
Floor Drain Required
Fuel : 10 Ltrs. Diesel
Engine Oil : Multigrade 20W40
Exhaust Emission
Floor Area : 3 m X 2 m

Technical Details:

Type of Engine : Twin cylinder, four stroke, vertical water cooled, crank start, diesel engine, Make: Kirloskar (Model:TV-2)
Type of Loading : Eddy Current Dynamometer
Fuel Measuring System : Fuel measuring system consists of a fuel tank, a burette and a three way cock arrangement.
Air Intake Measuring System: Air tank fitted with orifice and water manometer.
Temperature Measurement : Digital Temperature Indicator with multi-channel switch
Temperature Sensors : Thermocouple (6 nos.)
RPM measurement : RPM Indicator with Proximity sensor.
Exhaust Gas Calorimeter : Made of Stainless Steel including the body & the tube for cooling water circulation and designed to get maximum temperature difference. The body of the calorimeter is insulated on all sides to prevent heat losses due to radiation.

Products