TECHNICAL SPECIFICATIONS:

1. Training system control panel having rating of Solar Panel 500 VA , and 100VA of Wind Power and it should be used as solar and Wind training system and also power generation as well.
2. Training system control panel should have built in DC voltmeters, DC ammeters, AC Voltmeter AC multifunction meter(for AC current, voltage, power, frequency).
3. Training should have control panel built in protection circuit for battery & solar panel.
4. Training system control panel have built in 30A terminals for making the connection.
5. Training System includes:
250Wp solar panel: 2 Nos., Wind Generator 10VA 1Nos. Battery 100Ah: 2 Nos., PCU (POWER AND CHARGE CONTROLLER UNIT):
1 No., Control panel for experiments equipped with meters, connecting terminals and switches.
6. Solar Panel: 02 Nos.
Pm : 250Wp,Voc : 43V,Isc : 7.75A,Vmp : 35V,Imp : 7.14A
Wind Generator: 1Nos.
8. Battery: 02 Nos. Solar Battery of Capacity: 12V/100Ah, Type : C10
9. Charge Controller Technologies:
Solar PV Module : 24–50V,Current : 40A,Battery voltage : 24V,Technology : PWM based MPPT, Charging Stage : Bulk, Absorptions and Float.
10. Meter specification : DC Voltmeter : 0-300V ; DC Ammeter : 0-40A ; Multi Function Meter : Voltage-10-230V ; Current-100mA-5A ; Watt-10-1200W ; Energy meter Display Resolution- 0.001kWh ; Frequency-50Hz.
Inverter Capacity 600VA and Input Voltage 190~260V AC, Output Voltage on Mains mode is same as input, Output Voltage on UPS mode 210~245V,Output Frequency on UPS mode 50Hz ±0.1Hz,Output waveform on Mains mode is same as input, Output waveform on UPS mode Modified Sine wave, Battery Charging Current 12A,Efficiency at full load >80%, UPS overload and short circuit facility is available , control panel design based Microcontroller, MCB : C Type 16A.

Training platform is designed to conduct the below listed experiments.
a. Measurement and Analysis of Different parameters of Solar PV Module : open circuit and short circuit, parameter measurement with series and parallel PV modules , I-V characteristic and Power curve of PV module and PV array ., efficiency and fill factor.
b. Study of Wind Power and Wind Energy.
c. Load Estimation and calculation.
d. Study of Charge controller.
e. Study of different parameter of inverter efficiency , PWM switching , charging of batteries , over load and over battery protection
STANDARD ACCESSORIES : Main cord , Patch cord, Operating manual.
ELECTRIC SUPPLY SPECIFICATION: AC 240 v.